# CR Touch - what is the best bed leveling method?

**URL:** https://marlin.crc.id.au/forum/t/cr-touch-what-is-the-best-bed-leveling-method/751
**Category:** Firmware Builder
**Created:** [16 March 2022 12:22 UTC](https://marlin.crc.id.au/forum/t/cr-touch-what-is-the-best-bed-leveling-method/751 "2022-03-16T12:22:32Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![zogthegreat](https://marlin.crc.id.au/forum/letter_avatar_proxy/v4/letter/z/3bc359/32.png) [@zogthegreat](https://marlin.crc.id.au/forum/u/zogthegreat)
#### Post date: [16 March 2022 12:22 UTC](https://marlin.crc.id.au/forum/t/cr-touch-what-is-the-best-bed-leveling-method/751/1 "2022-03-16T12:22:32Z")

</div>

Hi everyone!

I have a new SKR Mini v2.0 on my Ender 3 that I’m using firmware builder for and I’m stuck on the bed leveling section. Which of the following should I choose to enable when using a CR Touch for bed leveling?

Bilinear Bed Leveling  
Unified Bed Leveling  
Manual Mesh Leveling

Any thoughts or suggestions would be appreciated!

Thanks!

zog

---

<div class="post-metadata">

### Author: ![CRCinAU](https://marlin.crc.id.au/forum/user_avatar/marlin.crc.id.au/crcinau/32/1337_2.png) [@CRCinAU](https://marlin.crc.id.au/forum/u/CRCinAU)
#### Post date: [16 March 2022 15:14 UTC](https://marlin.crc.id.au/forum/t/cr-touch-what-is-the-best-bed-leveling-method/751/2 "2022-03-16T15:14:08Z")

</div>

I use bilinear - I’ve never had to change from it based on performance.

I did play with UBL - but didn’t think the extra complexity delivered any practical gains over Bilinear…