# Do the Daily Builds Include Power loss Recovery?

**URL:** https://marlin.crc.id.au/forum/t/do-the-daily-builds-include-power-loss-recovery/1315
**Category:** Support
**Created:** [4 December 2022 15:10 UTC](https://marlin.crc.id.au/forum/t/do-the-daily-builds-include-power-loss-recovery/1315 "2022-12-04T15:10:10Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![Damion](https://marlin.crc.id.au/forum/letter_avatar_proxy/v4/letter/d/ac91a4/32.png) [@Damion](https://marlin.crc.id.au/forum/u/Damion)
#### Post date: [4 December 2022 15:10 UTC](https://marlin.crc.id.au/forum/t/do-the-daily-builds-include-power-loss-recovery/1315/1 "2022-12-04T15:10:10Z")

</div>

Just curious, its getting the time of year that winter storms cause power outages ( Happened once already halfway through a small print ) and I cant get power loss recovery to show up on the screen??

Running Ender 3 Pro 4.2.7 board, BL touch

Thanks

---

<div class="post-metadata">

### Author: ![CRCinAU](https://marlin.crc.id.au/forum/user_avatar/marlin.crc.id.au/crcinau/32/1337_2.png) [@CRCinAU](https://marlin.crc.id.au/forum/u/CRCinAU)
#### Post date: [6 December 2022 07:09 UTC](https://marlin.crc.id.au/forum/t/do-the-daily-builds-include-power-loss-recovery/1315/2 "2022-12-06T07:09:13Z")

</div>

I don’t normally enable power loss recovery. Most boards only support saving these files to an SD Card, which given the file is rewritten with every Z line of print, it wears a lot of SD Cards our really quickly giving you a dead SD card, and eventually corrupt files to print.

If you wish to enable it however, you could build a custom firmware via the Builder with it enabled.