# E3v2 4.2.7 microswiss probe to bed offsets
**URL:** https://marlin.crc.id.au/forum/t/e3v2-4-2-7-microswiss-probe-to-bed-offsets/1132
**Category:** Support
**Created:** [6 September 2022 00:41 UTC](https://marlin.crc.id.au/forum/t/e3v2-4-2-7-microswiss-probe-to-bed-offsets/1132 "2022-09-06T00:41:55Z")
**Posts on this page:** 4
**Page:** 1
### Author:  [@dualznz](https://marlin.crc.id.au/forum/u/dualznz)
#### Post date: [6 September 2022 00:41 UTC](https://marlin.crc.id.au/forum/t/e3v2-4-2-7-microswiss-probe-to-bed-offsets/1132/1 "2022-09-06T00:41:55Z")
Hi,
Love the firmware, i recently got the creality 4.2.7 board for my 3v2 as the 4.2.2 was having issues but i do not see an option in the builder for `NOZZLE_TO_PROBE_OFFSET` which i need to setup in order for my microswiss direct drive to work.
Or so i just set offsets in screen menu on printer.
---
### Author:  [@dualznz](https://marlin.crc.id.au/forum/u/dualznz)
#### Post date: [6 September 2022 00:59 UTC](https://marlin.crc.id.au/forum/t/e3v2-4-2-7-microswiss-probe-to-bed-offsets/1132/2 "2022-09-06T00:59:36Z")
ok nevermind i just ran M851 and stored the probe offsets that way.
cheers
---
### Author:  [@CRCinAU](https://marlin.crc.id.au/forum/u/CRCinAU)
#### Post date: [6 September 2022 04:14 UTC](https://marlin.crc.id.au/forum/t/e3v2-4-2-7-microswiss-probe-to-bed-offsets/1132/3 "2022-09-06T04:14:02Z")
Yep - that is the preferred way to set the probe offsets.
---
### Author:  [@system](https://marlin.crc.id.au/forum/u/system)
#### Post date: [8 September 2022 04:14 UTC](https://marlin.crc.id.au/forum/t/e3v2-4-2-7-microswiss-probe-to-bed-offsets/1132/4 "2022-09-08T04:14:53Z")
This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.