# Ender 3 pro CR Touch help

**URL:** <https://marlin.crc.id.au/forum/t/ender-3-pro-cr-touch-help/2267>\
**Category:** Firmware Builder\
**Created:** [16 September 2024 16:41 UTC](https://marlin.crc.id.au/forum/t/ender-3-pro-cr-touch-help/2267 "2024-09-16T16:41:52Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![shunter](https://marlin.crc.id.au/forum/letter_avatar_proxy/v4/letter/s/858c86/32.png) [@shunter](https://marlin.crc.id.au/forum/u/shunter)\
**Post date:** [16 September 2024 16:41 UTC](https://marlin.crc.id.au/forum/t/ender-3-pro-cr-touch-help/2267/1 "2024-09-16T16:41:52Z")

</div>

firmware help. i have a ender 3 pro with a 4.2.7 main board with a cr-touch. i tried building one but there is no cr-touch available only thing i see is bl-touch. am i missing something, thanks for your help!

---

<div class="post-metadata">

**Author:** ![shunter](https://marlin.crc.id.au/forum/letter_avatar_proxy/v4/letter/s/858c86/32.png) [@shunter](https://marlin.crc.id.au/forum/u/shunter)\
**Post date:** [29 September 2024 11:15 UTC](https://marlin.crc.id.au/forum/t/ender-3-pro-cr-touch-help/2267/2 "2024-09-29T11:15:04Z")

</div>

best $15 i have ever spent “NOT” wish i could get it back… no help at all, just crickets