# Ender 3 SKR mini E3 V3 - firmware 20240803 autohome issue and print failure **URL:** https://marlin.crc.id.au/forum/t/ender-3-skr-mini-e3-v3-firmware-20240803-autohome-issue-and-print-failure/2208 **Category:** Firmware Builder **Created:** [3 August 2024 13:39 UTC](https://marlin.crc.id.au/forum/t/ender-3-skr-mini-e3-v3-firmware-20240803-autohome-issue-and-print-failure/2208 "2024-08-03T13:39:49Z") **Posts on this page:** 1 **Page:** 1
### Author: ![Guilherme\_Lima](https://marlin.crc.id.au/forum/user_avatar/marlin.crc.id.au/guilherme_lima/32/1162_2.png) [@Guilherme\_Lima](https://marlin.crc.id.au/forum/u/Guilherme_Lima) #### Post date: [3 August 2024 13:39 UTC](https://marlin.crc.id.au/forum/t/ender-3-skr-mini-e3-v3-firmware-20240803-autohome-issue-and-print-failure/2208/1 "2024-08-03T13:39:49Z")
1 **Auto Home Issue:** - When I perform the _auto home_, the extruder always stays too high, even after I manually adjust the height. - Additionally, I have to readjust the height every time I turn the printer on or after finishing a print. 2 **Issue When Starting a Print:** - When I try to start a print, the printer begins printing but only makes one line and then stops. - It’s worth noting that the printer doesn’t have a filament sensor, but that doesn’t seem to be related to the problem. 3 **Issue with Printing G-code Calibration Files:** - When I try to print a G-code calibration file, the printer simply doesn’t start the print. 4 **Don’t work with USB.** \*Only work with usb in Utilimaker cura I would be happy if anyone can help because I don’t know anything and I’m completely new to this