# Ender 3v2 BLtouch LCD bed leveling issue

**URL:** https://marlin.crc.id.au/forum/t/ender-3v2-bltouch-lcd-bed-leveling-issue/59
**Category:** Bug Reports
**Tags:** ender-3-v2, bltouch
**Created:** [17 July 2021 14:07 UTC](https://marlin.crc.id.au/forum/t/ender-3v2-bltouch-lcd-bed-leveling-issue/59 "2021-07-17T14:07:16Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![fondyin](https://marlin.crc.id.au/forum/user_avatar/marlin.crc.id.au/fondyin/32/41_2.png) [@fondyin](https://marlin.crc.id.au/forum/u/fondyin)
#### Post date: [17 July 2021 14:07 UTC](https://marlin.crc.id.au/forum/t/ender-3v2-bltouch-lcd-bed-leveling-issue/59/1 "2021-07-17T14:07:16Z")

</div>

Errors:  
LCD\_BED\_LEVELING requires a programmable LCD controller.

I am getting an LCD\_BED\_LEVELING requires a programmable LCD controller error msg when I try to upload for a Ender3 v2 with mesh bed leveling and LCD\_BED\_LEVELING options set.

---

<div class="post-metadata">

### Author: ![CRCinAU](https://marlin.crc.id.au/forum/user_avatar/marlin.crc.id.au/crcinau/32/1337_2.png) [@CRCinAU](https://marlin.crc.id.au/forum/u/CRCinAU)
#### Post date: [17 July 2021 14:37 UTC](https://marlin.crc.id.au/forum/t/ender-3v2-bltouch-lcd-bed-leveling-issue/59/2 "2021-07-17T14:37:09Z")

</div>

This is correct.

Currently, the Ender 3 V2 LCD screen does not support the displays required to use the `LCD_BED_LEVELING` option.

There are works underway to offer two options long term.

MarlinUI: [https://github.com/MarlinFirmware/Marlin/pull/22211](https://github.com/MarlinFirmware/Marlin/pull/22211)

An enhanced DWIN menu system: [Enhanced routines for DWIN display on Ender3v2 by mriscoc · Pull Request #21942 · MarlinFirmware/Marlin · GitHub](https://github.com/MarlinFirmware/Marlin/pull/21942)

Once these are finalised and merged, they’ll be available to use.