# Ender3-v4.2.2-BLTouch daily build

**URL:** <https://marlin.crc.id.au/forum/t/ender3-v4-2-2-bltouch-daily-build/2050>\
**Category:** Firmware Builder\
**Created:** [1 February 2024 06:36 UTC](https://marlin.crc.id.au/forum/t/ender3-v4-2-2-bltouch-daily-build/2050 "2024-02-01T06:36:35Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![robertleelittle](https://marlin.crc.id.au/forum/user_avatar/marlin.crc.id.au/robertleelittle/32/1066_2.png) [@robertleelittle](https://marlin.crc.id.au/forum/u/robertleelittle)\
**Post date:** [1 February 2024 06:36 UTC](https://marlin.crc.id.au/forum/t/ender3-v4-2-2-bltouch-daily-build/2050/1 "2024-02-01T06:36:35Z")

</div>

I am interested in getting the config files for this daily build. I have a BTT SPS v2.0 and need to make afew config changes. Also, I tried the firmware builder but I can’t seem to replicate the amazing settings in the daily build.

Thanks,

Rob LIttle.

---

<div class="post-metadata">

**Author:** ![CRCinAU](https://marlin.crc.id.au/forum/user_avatar/marlin.crc.id.au/crcinau/32/1337_2.png) [@CRCinAU](https://marlin.crc.id.au/forum/u/CRCinAU)\
**Post date:** [1 February 2024 09:04 UTC](https://marlin.crc.id.au/forum/t/ender3-v4-2-2-bltouch-daily-build/2050/2 "2024-02-01T09:04:47Z")

</div>

The config can be written out to the SD card via `M503 C`

> **[Report Settings](https://marlinfw.org/docs/gcode/M503.html)**
>
> Print a concise report of all runtime-configurable settings (in SRAM) to the host console. This command reports the active settings which may or may not be the same as those stored in the EEPROM.

---

<div class="post-metadata">

**Author:** ![robertleelittle](https://marlin.crc.id.au/forum/user_avatar/marlin.crc.id.au/robertleelittle/32/1066_2.png) [@robertleelittle](https://marlin.crc.id.au/forum/u/robertleelittle)\
**Post date:** [1 February 2024 16:22 UTC](https://marlin.crc.id.au/forum/t/ender3-v4-2-2-bltouch-daily-build/2050/3 "2024-02-01T16:22:05Z")

</div>

Thank you for your quick response. I did it and now have the json file. This does not give me what I wanted. I just would like to get the configuration.h and the configuration\_adv.h for ^^ the daily build above, so I can have a baseline to play with. Can you just email them to me?

FYI: It would be helpful if you simply added a link to these files in the download section for the firmware. It should be very easy.

Thanks for all that you guys do. Marllin is GREAT!!!

---

<div class="post-metadata">

**Author:** ![Ferrograph](https://marlin.crc.id.au/forum/letter_avatar_proxy/v4/letter/f/8e7dd6/32.png) [@Ferrograph](https://marlin.crc.id.au/forum/u/Ferrograph)\
**Post date:** [27 December 2024 02:19 UTC](https://marlin.crc.id.au/forum/t/ender3-v4-2-2-bltouch-daily-build/2050/4 "2024-12-27T02:19:07Z")

</div>

I too am finding building Marlin a frustrating experience. Even with the Auto Build tool and VS code its really not simple. The Custom builder is also limited and not the same as the daily builds. Why so secret?

I really do need the source header files for the daily builds so I have a known working baseline. I have Ender 3 printers with various versions of the motherboard and various mods for special applications. I’m wasting colossal amount of time trying to get even one firmware built.

Can I please have access to the daily build configs? I do pay for the service.

The “Example” config files are pretty useless, and none match the naming of the daily builds.