# Firmware For Ender 3 Pro With 4.2.7 Board

**URL:** https://marlin.crc.id.au/forum/t/firmware-for-ender-3-pro-with-4-2-7-board/1607
**Category:** General Discussion
**Created:** [19 March 2023 02:41 UTC](https://marlin.crc.id.au/forum/t/firmware-for-ender-3-pro-with-4-2-7-board/1607 "2023-03-19T02:41:55Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![mcfc4heatons](https://marlin.crc.id.au/forum/letter_avatar_proxy/v4/letter/m/da6949/32.png) [@mcfc4heatons](https://marlin.crc.id.au/forum/u/mcfc4heatons)
#### Post date: [19 March 2023 02:41 UTC](https://marlin.crc.id.au/forum/t/firmware-for-ender-3-pro-with-4-2-7-board/1607/1 "2023-03-19T02:41:55Z")

</div>

In the list of Firmware builds I don’t see a download for Ender 3 Pro With 4.2.7 Board? Is there a reason for this?

---

<div class="post-metadata">

### Author: ![CRCinAU](https://marlin.crc.id.au/forum/user_avatar/marlin.crc.id.au/crcinau/32/1337_2.png) [@CRCinAU](https://marlin.crc.id.au/forum/u/CRCinAU)
#### Post date: [20 March 2023 07:47 UTC](https://marlin.crc.id.au/forum/t/firmware-for-ender-3-pro-with-4-2-7-board/1607/2 "2023-03-20T07:47:03Z")

</div>

The firmware is the same between Ender 3 and Ender 3 Pro systems.

There is no difference between the two as far as firmware goes - just physical differences that do not alter anything related to firmware - such as power supply brand and the thickness of the Y mount.