# Firmware link downloads HTML file
**URL:** https://marlin.crc.id.au/forum/t/firmware-link-downloads-html-file/783
**Category:** Bug Reports
**Created:** [1 April 2022 10:56 UTC](https://marlin.crc.id.au/forum/t/firmware-link-downloads-html-file/783 "2022-04-01T10:56:24Z")
**Posts on this page:** 16
**Page:** 1
### Author:  [@Townie](https://marlin.crc.id.au/forum/u/Townie)
#### Post date: [1 April 2022 10:56 UTC](https://marlin.crc.id.au/forum/t/firmware-link-downloads-html-file/783/1 "2022-04-01T10:56:24Z")
Hi
Im trying to download the firmware but it just downloads a webpage
---
### Author:  [@CRCinAU](https://marlin.crc.id.au/forum/u/CRCinAU)
#### Post date: [1 April 2022 13:57 UTC](https://marlin.crc.id.au/forum/t/firmware-link-downloads-html-file/783/2 "2022-04-01T13:57:37Z")
This is likely your browser messing up.
The file you download is either a .bin or .hex file. If you rename it to that, you should be good to go unless your browser is really broken.
---
### Author:  [@Ferrograph](https://marlin.crc.id.au/forum/u/Ferrograph)
#### Post date: [17 April 2022 10:03 UTC](https://marlin.crc.id.au/forum/t/firmware-link-downloads-html-file/783/3 "2022-04-17T10:03:16Z")
Im getting this too where I was previously able to download the bin file ok and Ive changed nothing. The file is too small to be the firmware its only like 10K and contains html.
---
### Author:  [@Ferrograph](https://marlin.crc.id.au/forum/u/Ferrograph)
#### Post date: [17 April 2022 10:10 UTC](https://marlin.crc.id.au/forum/t/firmware-link-downloads-html-file/783/4 "2022-04-17T10:10:21Z")
If I copy the download link and past into address bar the page is redirected to the firmware page:
[https://marlin.crc.id.au/firmware/Ender%203%20-%20v4.2.7%20Board%20-%20BLTouch/Ender3-v4.2.7-BLTouch-20220417.bin](https://marlin.crc.id.au/firmware/Ender%203%20-%20v4.2.7%20Board%20-%20BLTouch/Ender3-v4.2.7-BLTouch-20220417.bin)
Redirects to:
[https://marlin.crc.id.au/firmware/](https://marlin.crc.id.au/firmware/)
Im definitely signed in too.
---
### Author:  [@CRCinAU](https://marlin.crc.id.au/forum/u/CRCinAU)
#### Post date: [17 April 2022 11:00 UTC](https://marlin.crc.id.au/forum/t/firmware-link-downloads-html-file/783/5 "2022-04-17T11:00:45Z")
I signed in and then tried your link - it worked for me?
The file I get is 183,148 bytes.
---
### Author:  [@Ferrograph](https://marlin.crc.id.au/forum/u/Ferrograph)
#### Post date: [17 April 2022 11:15 UTC](https://marlin.crc.id.au/forum/t/firmware-link-downloads-html-file/783/6 "2022-04-17T11:15:19Z")
LOL, I dont know then?
All I know is it worked the last time I downloaded which was “Ender3-v4.2.7-BLTouch-20220319.bin”
I just tried Edge and that worked. Must be something Chrome related
---
### Author:  [@CRCinAU](https://marlin.crc.id.au/forum/u/CRCinAU)
#### Post date: [17 April 2022 11:50 UTC](https://marlin.crc.id.au/forum/t/firmware-link-downloads-html-file/783/7 "2022-04-17T11:50:41Z")
I use Brave as a browser - its based on Chrome - but with adblocker and anti-tracking baked in. I can’t really comment on other browsers…
At least its free and easy to change browsers these days 🙂
---
### Author:  [@HodgePodge](https://marlin.crc.id.au/forum/u/HodgePodge)
#### Post date: [13 May 2022 22:38 UTC](https://marlin.crc.id.au/forum/t/firmware-link-downloads-html-file/783/8 "2022-05-13T22:38:35Z")
I have the same problem. have tried MS Edge and Firefox and same result for both.
---
### Author:  [@uki](https://marlin.crc.id.au/forum/u/uki)
#### Post date: [24 May 2022 18:00 UTC](https://marlin.crc.id.au/forum/t/firmware-link-downloads-html-file/783/9 "2022-05-24T18:00:02Z")
I can confirm same thing on Firefox, Edge and Android Browser today.
EDIT: Ender 3v2 BLTouch, 4.2.2
---
### Author:  [@CRCinAU](https://marlin.crc.id.au/forum/u/CRCinAU)
#### Post date: [26 May 2022 01:38 UTC](https://marlin.crc.id.au/forum/t/firmware-link-downloads-html-file/783/10 "2022-05-26T01:38:51Z")
If someone wants to send me the HTML file that their PC downloads so I can take a look…
Fire it to marlin@crc.id.au and I’ll see what I can see.
Please don’t post it here - as if it isn’t the binary file, it may contain your personal information.
---
### Author:  [@uki](https://marlin.crc.id.au/forum/u/uki)
#### Post date: [26 May 2022 07:45 UTC](https://marlin.crc.id.au/forum/t/firmware-link-downloads-html-file/783/11 "2022-05-26T07:45:04Z")
File sent.
Cheers!
uki
---
### Author:  [@CRCinAU](https://marlin.crc.id.au/forum/u/CRCinAU)
#### Post date: [26 May 2022 10:09 UTC](https://marlin.crc.id.au/forum/t/firmware-link-downloads-html-file/783/12 "2022-05-26T10:09:04Z")
Thanks for the file - really strange.
I’ve made a couple of changes based on educated guesses… Can you try again and see if you see proper behaviour now?
---
### Author:  [@uki](https://marlin.crc.id.au/forum/u/uki)
#### Post date: [26 May 2022 11:25 UTC](https://marlin.crc.id.au/forum/t/firmware-link-downloads-html-file/783/13 "2022-05-26T11:25:53Z")
Still the same.
Cheers.
uki
EDIT: I think I found something;
Link that do NOT work:
[https://marlin.crc.id.au/firmware/Ender%203%20V2%20-%20v4.2.2%20Board%20-%20BLTouchEnder3-V2-BLTouch-MarlinUI-20220526.bin](https://marlin.crc.id.au/firmware/Ender%203%20V2%20-%20v4.2.2%20Board%20-%20BLTouchEnder3-V2-BLTouch-MarlinUI-20220526.bin)
Link that DO work:
[https://marlin.crc.id.au/firmware/Ender%203%20V2%20-%20v4.2.2%20Board%20-%20BLTouch/Ender3-V2-BLTouch-MarlinUI-20220526.bin](https://marlin.crc.id.au/firmware/Ender%203%20V2%20-%20v4.2.2%20Board%20-%20BLTouch/Ender3-V2-BLTouch-MarlinUI-20220526.bin)
Just “/” (slash) before file name “Ender3-V2-BLTouch-MarlinUI-20220526.bin” and it works.
---
### Author:  [@CRCinAU](https://marlin.crc.id.au/forum/u/CRCinAU)
#### Post date: [26 May 2022 11:39 UTC](https://marlin.crc.id.au/forum/t/firmware-link-downloads-html-file/783/14 "2022-05-26T11:39:54Z")
Yes, there should always be a slash in between the firmware filename and the path…
`https://marlin.crc.id.au/firmware/Ender%203%20V2%20-%20v4.2.2%20Board%20-%20BLTouch/Ender3-V2-BLTouch-MarlinUI-20220526.bin`
The above is the link I get from right-clicking the Download Icon - which seems correct.
EDIT: Ohhhhh wait - I see what you mean… It seems if there isn’t a trailing slash on the path when you visit a file listing for a printer, the download links break too… This shouldn’t happen internally - but I guess that could break it if someone links externally from outside of the site to a link internally…
Let me take a looksee and fix that up…
---
### Author:  [@CRCinAU](https://marlin.crc.id.au/forum/u/CRCinAU)
#### Post date: [26 May 2022 11:56 UTC](https://marlin.crc.id.au/forum/t/firmware-link-downloads-html-file/783/15 "2022-05-26T11:56:10Z")
Ok, give that a go now and see if you still have the same issue…
---
### Author:  [@uki](https://marlin.crc.id.au/forum/u/uki)
#### Post date: [26 May 2022 13:08 UTC](https://marlin.crc.id.au/forum/t/firmware-link-downloads-html-file/783/16 "2022-05-26T13:08:02Z")
WORKS! Thank You.
uki