# Getting errors on FW builder **URL:** \ **Category:** Firmware Builder\ **Created:** [12 May 2023 00:02 UTC](https://marlin.crc.id.au/forum/t/getting-errors-on-fw-builder/1738 "2023-05-12T00:02:48Z")\ **Posts on this page:** 1\ **Page:** 1
**Author:** ![expwn](https://marlin.crc.id.au/forum/user_avatar/marlin.crc.id.au/expwn/32/878_2.png) [@expwn](https://marlin.crc.id.au/forum/u/expwn)\ **Post date:** [12 May 2023 00:02 UTC](https://marlin.crc.id.au/forum/t/getting-errors-on-fw-builder/1738/1 "2023-05-12T00:02:48Z")
Double edit: started a new profile from scratch and it went thru. Weird. EDIT: This is happening even on the build I has success with yesterday. Maybe a compiler issue? Same settings I used for a working one, I’m just trying to change my X and Y min to make the probe hit the correct points instead of being 40mm away from the right edge of the bed. Not sure what’s going on here, BANG\_MAX and all temps are the same as they were Errors: Marlin/src/core/…/inc/…/…/Configuration.h:674:17: error: ‘BANG\_MAX’ was not declared in this scope; did you mean ‘RAND\_MAX’? Marlin/src/core/…/module/temperature.h:368:23: error: template argument 2 is invalid Marlin/src/core/…/module/temperature.h:1207:68: error: request for member ‘reset’ in ‘Temperature::temp\_hotend[((int)e)].PIDHeaterInfo::pid’, which is of non-class type ‘int’ Marlin/src/core/…/module/temperature.h:1212:46: error: request for member ‘set’ in ‘Temperature::temp\_hotend[((int)e)].PIDHeaterInfo::pid’, which is of non-class type ‘int’ Marlin/src/inc/…/…/Configuration.h:674:17: error: ‘BANG\_MAX’ was not declared in this scope; did you mean ‘RAND\_MAX’? Marlin/src/module/temperature.h:368:23: error: template argument 2 is invalid Marlin/src/module/temperature.h:1207:68: error: request for member ‘reset’ in ‘Temperature::temp\_hotend[((int)e)].PIDHeaterInfo::pid’, which is of non-class type ‘int’ Marlin/src/module/temperature.h:1212:46: error: request for member ‘set’ in ‘Temperature::temp\_hotend[((int)e)].PIDHeaterInfo::pid’, which is of non-class type ‘int’ Marlin/src/feature/…/inc/…/…/Configuration.h:674:17: error: ‘BANG\_MAX’ was not declared in this scope; did you mean ‘RAND\_MAX’? Marlin/src/feature/…/module/temperature.h:368:23: error: template argument 2 is invalid Marlin/src/feature/…/module/temperature.h:1207:68: error: request for member ‘reset’ in ‘Temperature::temp\_hotend[((int)e)].PIDHeaterInfo::pid’, which is of non-class type ‘int’ Marlin/src/feature/…/module/temperature.h:1212:46: error: request for member ‘set’ in ‘Temperature::temp\_hotend[((int)e)].PIDHeaterInfo::pid’, which is of non-class type ‘int’ Marlin/src/feature/…/inc/…/…/Configuration.h:674:17: error: ‘BANG\_MAX’ was not declared in this scope; did you mean ‘RAND\_MAX’? Marlin/src/feature/…/module/temperature.h:368:23: error: template argument 2 is invalid Marlin/src/feature/…/module/temperature.h:1207:68: error: request for member ‘reset’ in ‘Temperature::temp\_hotend[((int)e)].PIDHeaterInfo::pid’, which is of non-class type ‘int’ Marlin/src/feature/…/module/temperature.h:1212:46: error: request for member ‘set’ in ‘Temperature::temp\_hotend[((int)e)].PIDHeaterInfo::pid’, which is of non-class type ‘int’