# Linear Advance comes to Creality v4.2.x mainboards

**URL:** <https://marlin.crc.id.au/forum/t/linear-advance-comes-to-creality-v4-2-x-mainboards/1034>\
**Category:** Support\
**Created:** [23 July 2022 12:45 UTC](https://marlin.crc.id.au/forum/t/linear-advance-comes-to-creality-v4-2-x-mainboards/1034 "2022-07-23T12:45:29Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![CRCinAU](https://marlin.crc.id.au/forum/user_avatar/marlin.crc.id.au/crcinau/32/1337_2.png) [@CRCinAU](https://marlin.crc.id.au/forum/u/CRCinAU)\
**Post date:** [23 July 2022 12:45 UTC](https://marlin.crc.id.au/forum/t/linear-advance-comes-to-creality-v4-2-x-mainboards/1034/1 "2022-07-23T12:45:29Z")

</div>

Hi all,

Nightly firmware builds from 2022-07-22 onwards include support for Linear Advance on the Creality v4.2.2 and v4.2.7 mainboards.

This includes the Ender 3, Ender 3 Pro, and Ender 3 V2 mainboards.

In using Linear Advance, use [this tool](http://marlinfw.org/tools/lin_advance/k-factor.html) to calibrate. Use [this video](https://www.youtube.com/watch?v=n3yK0lJ8TWM) as a guide.

It’d be great to get some feedback from people who use these boards as to the performance of Linear Advance - and if the calibration tools work successfully.

You’ll need a firmware from 2022-07-22 or later to be able to use this feature.

---

<div class="post-metadata">

**Author:** ![CRCinAU](https://marlin.crc.id.au/forum/user_avatar/marlin.crc.id.au/crcinau/32/1337_2.png) [@CRCinAU](https://marlin.crc.id.au/forum/u/CRCinAU)\
**Post date:** [26 July 2022 09:27 UTC](https://marlin.crc.id.au/forum/t/linear-advance-comes-to-creality-v4-2-x-mainboards/1034/4 "2022-07-26T09:27:13Z")

</div>



---

<div class="post-metadata">

**Author:** ![inazuma750](https://marlin.crc.id.au/forum/letter_avatar_proxy/v4/letter/i/278dde/32.png) [@inazuma750](https://marlin.crc.id.au/forum/u/inazuma750)\
**Post date:** [3 October 2022 20:23 UTC](https://marlin.crc.id.au/forum/t/linear-advance-comes-to-creality-v4-2-x-mainboards/1034/5 "2022-10-03T20:23:59Z")

</div>

see “[Ender 3 Pro / Linear Advance - #9 by pXn\_Emerica](https://marlin.crc.id.au/forum/t/ender-3-pro-linear-advance/937/9)”

there are my comments for LinAdv with my Ender 3 Pro and 4.2.7 silentboard