# Marlin for 3-Axis CNC?

**URL:** https://marlin.crc.id.au/forum/t/marlin-for-3-axis-cnc/987
**Category:** Feature Requests
**Created:** [25 June 2022 22:48 UTC](https://marlin.crc.id.au/forum/t/marlin-for-3-axis-cnc/987 "2022-06-25T22:48:31Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![JSmithForum](https://marlin.crc.id.au/forum/letter_avatar_proxy/v4/letter/j/8edcca/32.png) [@JSmithForum](https://marlin.crc.id.au/forum/u/JSmithForum)
#### Post date: [25 June 2022 22:48 UTC](https://marlin.crc.id.au/forum/t/marlin-for-3-axis-cnc/987/1 "2022-06-25T22:48:32Z")

</div>

I’m considering switching my CNC Router (Workbee 1500mm x 1500mm) from a grbl board to one of the BTT SKR boards. I was wondering if there were any build versions that were already suited to the 3-axis application or if I would need to look into building firmware myself. Any help on the topic would be greatly appreciated.

---

<div class="post-metadata">

### Author: ![CRCinAU](https://marlin.crc.id.au/forum/user_avatar/marlin.crc.id.au/crcinau/32/1337_2.png) [@CRCinAU](https://marlin.crc.id.au/forum/u/CRCinAU)
#### Post date: [26 June 2022 01:00 UTC](https://marlin.crc.id.au/forum/t/marlin-for-3-axis-cnc/987/2 "2022-06-26T01:00:17Z")

</div>

I have no knowledge of CNC setups 🙂