# Need a firmware built please for Ender 3 Pro

**URL:** https://marlin.crc.id.au/forum/t/need-a-firmware-built-please-for-ender-3-pro/2727
**Category:** Firmware Builder
**Created:** [23 April 2026 04:42 UTC](https://marlin.crc.id.au/forum/t/need-a-firmware-built-please-for-ender-3-pro/2727 "2026-04-23T04:42:02Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![touched2u](https://marlin.crc.id.au/forum/user_avatar/marlin.crc.id.au/touched2u/32/1483_2.png) [@touched2u](https://marlin.crc.id.au/forum/u/touched2u)
#### Post date: [23 April 2026 04:42 UTC](https://marlin.crc.id.au/forum/t/need-a-firmware-built-please-for-ender-3-pro/2727/1 "2026-04-23T04:42:02Z")

</div>

1. **Printer:** Ender 3 Pro
2. **Board:** BTT SKR Mini E3 V3.0
3. **Probe:** BIQU MicroProbe V2
4. **TFT:** BTT TFT35 E3 V3.0

---

<div class="post-metadata">

### Author: ![touched2u](https://marlin.crc.id.au/forum/user_avatar/marlin.crc.id.au/touched2u/32/1483_2.png) [@touched2u](https://marlin.crc.id.au/forum/u/touched2u)
#### Post date: [7 May 2026 16:21 UTC](https://marlin.crc.id.au/forum/t/need-a-firmware-built-please-for-ender-3-pro/2727/2 "2026-05-07T16:21:03Z")

</div>

this is not needed anymore thanks just the same .