# New Option: Model Predictive Temperature Control (Experimental)

**URL:** https://marlin.crc.id.au/forum/t/new-option-model-predictive-temperature-control-experimental/782
**Category:** Firmware Builder
**Tags:** builder, hotend, marlin
**Created:** [1 April 2022 10:10 UTC](https://marlin.crc.id.au/forum/t/new-option-model-predictive-temperature-control-experimental/782 "2022-04-01T10:10:54Z")
**Posts on this page:** 1
**Showing post:** 6

<div class="post-metadata">

### Author: ![Frontpage32](https://marlin.crc.id.au/forum/user_avatar/marlin.crc.id.au/frontpage32/32/654_2.png) [@Frontpage32](https://marlin.crc.id.au/forum/u/Frontpage32)
#### Post date: [27 November 2022 05:40 UTC](https://marlin.crc.id.au/forum/t/new-option-model-predictive-temperature-control-experimental/782/6 "2022-11-27T05:40:52Z")

</div>

I don’t have octoprint but enabled it instead of the pid with bang bang. With stock settings in Marlin at 50mm/s and I am getting better quality than I did with the other way around. And seeing rock solid temps on the hotend unlike the stock settings used in YouTube videos for setup. Have some things to iron out with my SKR 2 rev B. In the firmware and make a new case for it. Once I have my manta M8P I will play around with the settings

---

_[View the full topic](https://marlin.crc.id.au/forum/t/new-option-model-predictive-temperature-control-experimental/782)._