# No 'buttons' on the home screen (Ender 3 V2)

**URL:** <https://marlin.crc.id.au/forum/t/no-buttons-on-the-home-screen-ender-3-v2/2560>\
**Category:** Support\
**Tags:** ender-3-v2\
**Created:** [6 October 2025 21:39 UTC](https://marlin.crc.id.au/forum/t/no-buttons-on-the-home-screen-ender-3-v2/2560 "2025-10-06T21:39:41Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![glitch](https://marlin.crc.id.au/forum/user_avatar/marlin.crc.id.au/glitch/32/1358_2.png) [@glitch](https://marlin.crc.id.au/forum/u/glitch)\
**Post date:** [6 October 2025 21:39 UTC](https://marlin.crc.id.au/forum/t/no-buttons-on-the-home-screen-ender-3-v2/2560/1 "2025-10-06T21:39:41Z")

</div>

Hi, I picked up a used Ender 3 V2. I just flashed the latest firmware from here onto the screen and the mainboard (4.2.7). The firmware seemed to load properly, but the screen doesn’t have any of the selectable buttons available. It just shows the temperature and position values and says “Ender 3 V2 Ready.” I used the file `Ender3-v2-v427-BLTouch-20251005.bin`, NOT the MarlinUI file.

 ![Screenshot 2025-10-06 at 2.39.21 PM](https://marlin.crc.id.au/forum/uploads/default/original/2X/1/1d4cfcddf03132d2015595315cbf2f92063f545a.jpeg)