# Support for the CR10S S5?

**URL:** <https://marlin.crc.id.au/forum/t/support-for-the-cr10s-s5/727>\
**Category:** Firmware Builder\
**Created:** [6 March 2022 15:21 UTC](https://marlin.crc.id.au/forum/t/support-for-the-cr10s-s5/727 "2022-03-06T15:21:42Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![chanddan](https://marlin.crc.id.au/forum/letter_avatar_proxy/v4/letter/c/59ef9b/32.png) [@chanddan](https://marlin.crc.id.au/forum/u/chanddan)\
**Post date:** [6 March 2022 15:21 UTC](https://marlin.crc.id.au/forum/t/support-for-the-cr10s-s5/727/1 "2022-03-06T15:21:42Z")

</div>

Hi can the firmware builder support CR10S S5? The CR10S profile works, but its max size is 300mm. The CR10S S5 is 500mm.