# Troubleshooting Non-Functional Printer After Marlin Firmware Update

**URL:** <https://marlin.crc.id.au/forum/t/troubleshooting-non-functional-printer-after-marlin-firmware-update/2238>\
**Category:** Bug Reports\
**Created:** [28 August 2024 07:25 UTC](https://marlin.crc.id.au/forum/t/troubleshooting-non-functional-printer-after-marlin-firmware-update/2238 "2024-08-28T07:25:20Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![wehideb](https://marlin.crc.id.au/forum/letter_avatar_proxy/v4/letter/w/e36b37/32.png) [@wehideb](https://marlin.crc.id.au/forum/u/wehideb)\
**Post date:** [28 August 2024 07:25 UTC](https://marlin.crc.id.au/forum/t/troubleshooting-non-functional-printer-after-marlin-firmware-update/2238/1 "2024-08-28T07:25:20Z")

</div>

Hi everyone,

I recently updated my 3D printer’s firmware using the Marlin Firmware Service; but after the update, my printer isn’t responding correctly. 🙃

The LCD screen lights up, but none of the controls are working; and the steppers aren’t moving at all. I’ve tried resetting the printer and re-uploading the firmware; but the problem still there . I have checked [Printer stops · Issue #2452 · MarlinFirmware/Marlin · GitHub](https://github.com/MarlinFirmware/Marlin/issues/2452) [Power Apps](https://www.igmguru.com/microsoft-training/powerapps-training) Marlin Firmware issues but still need help.

Has anyone faced a similar issue / could suggest troubleshooting steps?

Could it be a configuration file issue; or might I need to roll back to an older firmware version?

Thanks for any help! 🙂
