# When selecting Microswiss Hotend, not all settings are applied

**URL:** https://marlin.crc.id.au/forum/t/when-selecting-microswiss-hotend-not-all-settings-are-applied/995
**Category:** Bug Reports
**Created:** [28 June 2022 08:30 UTC](https://marlin.crc.id.au/forum/t/when-selecting-microswiss-hotend-not-all-settings-are-applied/995 "2022-06-28T08:30:31Z")
**Posts on this page:** 1
**Page:** 1

<div class="post-metadata">

### Author: ![Imagineer](https://marlin.crc.id.au/forum/letter_avatar_proxy/v4/letter/i/258eb7/32.png) [@Imagineer](https://marlin.crc.id.au/forum/u/Imagineer)
#### Post date: [28 June 2022 08:30 UTC](https://marlin.crc.id.au/forum/t/when-selecting-microswiss-hotend-not-all-settings-are-applied/995/1 "2022-06-28T08:30:31Z")

</div>

Custom builder;  
When selecting the microswiss directdrive hotend, the home offsets are automatically applied.  
However, the Extruder is also inverted compared to the original Ender 3.  
Expected these settings to automatically update as well.  
Might need to check if the autobuild versionshave this too

These are the correct orientations for Ender3 with Microswiss directdrive  
 ![image](https://marlin.crc.id.au/forum/uploads/default/original/1X/ad21096e2ae200745bbdd2a182dcf1e8aa60d785.png)