# Where is the firmware for ender 3 neo max

**URL:** https://marlin.crc.id.au/forum/t/where-is-the-firmware-for-ender-3-neo-max/1364
**Category:** Support
**Created:** [2 January 2023 14:02 UTC](https://marlin.crc.id.au/forum/t/where-is-the-firmware-for-ender-3-neo-max/1364 "2023-01-02T14:02:48Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![NotThe12thDr](https://marlin.crc.id.au/forum/user_avatar/marlin.crc.id.au/notthe12thdr/32/515_2.png) [@NotThe12thDr](https://marlin.crc.id.au/forum/u/NotThe12thDr)
#### Post date: [2 January 2023 14:02 UTC](https://marlin.crc.id.au/forum/t/where-is-the-firmware-for-ender-3-neo-max/1364/1 "2023-01-02T14:02:48Z")

</div>

I’ve looked through the ones on the site but I couldn’t find one for my newest printer does anyone know where I can find it?

---

<div class="post-metadata">

### Author: ![CRCinAU](https://marlin.crc.id.au/forum/user_avatar/marlin.crc.id.au/crcinau/32/1337_2.png) [@CRCinAU](https://marlin.crc.id.au/forum/u/CRCinAU)
#### Post date: [4 January 2023 03:19 UTC](https://marlin.crc.id.au/forum/t/where-is-the-firmware-for-ender-3-neo-max/1364/2 "2023-01-04T03:19:20Z")

</div>

I believe the Neo has a touchscreen?

If so, the touchscreens are not supported by Marlin as yet.

You could try the InsanityAutomation fork of Marlin - that might work.

---

<div class="post-metadata">

### Author: ![Rmc87](https://marlin.crc.id.au/forum/letter_avatar_proxy/v4/letter/r/cab0a1/32.png) [@Rmc87](https://marlin.crc.id.au/forum/u/Rmc87)
#### Post date: [26 January 2023 19:01 UTC](https://marlin.crc.id.au/forum/t/where-is-the-firmware-for-ender-3-neo-max/1364/3 "2023-01-26T19:01:38Z")

</div>

The max neo has the updated knob display not the touch screen