Ender 3 Max - v4.2.2 Control Board

Ender3-Max-v4.2.2-<date>.bin
 - Adds G2 / G3 Arc support
 - Adds G10 / G11 Firmware based retraction (Use M207, M208, M209 to configure)
 - Adds M600 - Filament Change
 - Adds M603 - Set Filament Load / Unload length
 - Adds M701 - Load Filament
 - Adds M702 - Unload Filament
 - Enabled Advanced OK
 - Enabled CLASSIC_JERK
 - Enabled Filament Sensor (Microswitch based)
 - Enabled Meatpack
Firmware Variant Size Build Date Downloads Feedback Download
Ender3-Max-v4.2.2-20251218.bin 174692 bytes 2025-12-17 23:17:58 UTC 0
Score: 0
Membership Required 
commit 5a9ce77ab3e59c7c8722bd39f112217bec1d6a71
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Wed Dec 17 15:31:04 2025 -0600

    🔧 FT Motion keep MULTISTEPPING_LIMIT

commit 47fed759b62c2df0067ef56debe9ba1d277105c7
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Tue Dec 16 20:24:23 2025 -0600

    📝 "Hisense" thermistor 13

commit 07565d9016162fb829f0484d462c6ae87bd41615
Author: David Buezas <dbuezas@users.noreply.github.com>
Date:   Wed Dec 17 03:05:55 2025 +0100

    🚸 Safer FTMotion parameter editing (#28191)
    
    Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

commit b73ebafa0f66a4a48f3269e5c2282ad0969e0933
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Wed Dec 17 00:40:16 2025 +0000

    [cron] Bump distribution date (2025-12-17)

commit 3e6a0ab7132c873296e89fd5e495351051dd4152
Author: David Buezas <dbuezas@users.noreply.github.com>
Date:   Wed Dec 17 00:25:37 2025 +0100

    🐛 FT Motion fix and refine (#28220)
    
    Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
Ender3-Max-v4.2.2-20251217.bin 174692 bytes 2025-12-16 23:17:58 UTC 0
Score: 0
Membership Required 
commit ec752068a5fb08733aca53a7779c0a4717551555
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Tue Dec 16 19:10:40 2025 +1300

    🩹 Fix up SD card sorting (#28218)
    
    Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

commit 54dfe6237cbdde8059cd703d23391678e9add909
Author: Andrew <18502096+classicrocker883@users.noreply.github.com>
Date:   Tue Dec 16 00:34:18 2025 -0500

    🔨 Fix and improve schema.py (#28228)

commit c39f32c54274cb4c7c1f4444e059a8d4e8f80f81
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Mon Dec 15 14:53:00 2025 -0600

    🧑‍💻 More MString debugging

commit 53c27cdd66f7b0b1d3ceeb784f76a6c011344546
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Mon Dec 15 21:58:28 2025 -0600

    🎨 MMU3 cleanup

commit 3ba633a9e2cbb43956d2303f07ecedb5515c466d
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Tue Dec 16 00:34:34 2025 +0000

    [cron] Bump distribution date (2025-12-16)
Ender3-Max-v4.2.2-20251216.bin 174772 bytes 2025-12-15 23:17:57 UTC 0
Score: 0
Membership Required 
commit 6cf98d0f82b87c39d65d6ec16255c50202c4ff5b
Author: narno2202 <130909513+narno2202@users.noreply.github.com>
Date:   Mon Dec 15 11:06:08 2025 +0100

    🩹 Ensure consistent FT Motion TICKS_BITS (#28223)
    
    Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

commit 9aade7f5df7551c62dfe95a2a3cbc896a7e27bbe
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Mon Dec 15 02:03:57 2025 -0600

    🔧 Reduce code for unused shapers
    
    Followup to #28217

commit 0952a372b6c7aebea9859da3ce0c64af62bbf994
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sun Dec 14 20:26:08 2025 -0600

    🔨 Preflight check MOTHERBOARD (#28221)

commit 44948ebc1f063caeccee0c430fadd3254413df39
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Mon Dec 15 00:36:26 2025 +0000

    [cron] Bump distribution date (2025-12-15)
Ender3-Max-v4.2.2-20251215.bin 174772 bytes 2025-12-14 23:17:59 UTC 1
Score: 0
Membership Required 
commit 1b194088e1745944124c4d65297e0fac3f3ff37b
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sun Dec 14 15:20:29 2025 -0600

    🔨 Single precision float (3)

commit f74713da0cd6ee13de43062b7211d0271859754e
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sat Dec 13 20:02:38 2025 -0600

    📝 Specify mm for NOZZLE_TO_PROBE_OFFSET

commit 575136a82aca9e8a63454f2f256414128baaba7d
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sat Dec 13 20:02:26 2025 -0600

    🎨 Clean up HAL/timers

commit bcece89ad037baf77e0340e244478d6de44a7b48
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Sun Dec 14 00:37:23 2025 +0000

    [cron] Bump distribution date (2025-12-14)
Ender3-Max-v4.2.2-20251214.bin 174772 bytes 2025-12-13 23:17:57 UTC 0
Score: 0
Membership Required 
commit 02e1199d514ad683e85885fb6720e3e17184655d
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Fri Dec 12 19:45:15 2025 -0600

    🔨 Single precision float (2)

commit 6f653f5993720d80b4d1ed899ce2a11fa4d60fc4
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Sat Dec 13 00:32:35 2025 +0000

    [cron] Bump distribution date (2025-12-13)

commit 89379cd373b2597d0c8cadd6a005de8d640a8273
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Fri Dec 12 17:09:13 2025 -0600

    🔨 Single precision float

commit b99f5c3618e0c5e20733da5f151cab2c91474868
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Fri Dec 12 17:08:39 2025 -0600

    🔧 Group motion conditionals
Ender3-Max-v4.2.2-20251213.bin 174876 bytes 2025-12-12 23:17:57 UTC 1
Score: 0
Membership Required 
commit e434fd0aefa87e1027d40019b6a71d19b68d132b
Author: Harald Wagener <oliof@pm.me>
Date:   Fri Dec 12 03:50:13 2025 +0100

    ✨ FTM_SHAPER_* options (#28217)
    
    Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

commit 7816f5dc46dc2b6a5cf480c14ae072921a25259e
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Fri Dec 12 00:34:09 2025 +0000

    [cron] Bump distribution date (2025-12-12)
Ender3-Max-v4.2.2-20251212.bin 174876 bytes 2025-12-11 23:17:58 UTC 0
Score: 0
Membership Required 
commit f2ac2e7cadcab6753a81e4a4d8372badab7ead7b
Author: narno2202 <130909513+narno2202@users.noreply.github.com>
Date:   Thu Dec 11 23:15:49 2025 +0100

    🚸 Optimize FTM menu code, use some setters (#28170)
    
    Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

commit 4cd972c3bb2b87319159b192a87b82979820f5d9
Author: narno2202 <130909513+narno2202@users.noreply.github.com>
Date:   Thu Dec 11 22:33:35 2025 +0100

    🐛 FT Motion - Set moving_axis_flag for each block (#28214)

commit 9eb82d8894bcc24c898a806bef4a185fd526f3f5
Author: David Buezas <dbuezas@users.noreply.github.com>
Date:   Thu Dec 11 22:30:17 2025 +0100

    🐛 Limit FTM reset-on-threshold E pos to maintain precision (#28192)

commit a889336b257c5ff8faf3724c1fa1cb1ae1bfaf65
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Thu Dec 11 00:34:17 2025 +0000

    [cron] Bump distribution date (2025-12-11)

commit 9c29c634b7d61e55af109de6cafd0c3899ebafe4
Author: Harald Wagener <oliof@pm.me>
Date:   Thu Dec 11 01:09:05 2025 +0100

    ✨ NO_STANDARD_MOTION (#28212)
    
    Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
Ender3-Max-v4.2.2-20251211.bin 174868 bytes 2025-12-10 23:17:56 UTC 0
Score: 0
Membership Required
Ender3-Max-v4.2.2-20251210.bin 174868 bytes 2025-12-09 23:17:58 UTC 0
Score: 0
Membership Required 
commit 6b18b1bb8a969766bd7fe91281e28c3e4b6510da
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Tue Dec 9 06:11:47 2025 +0000

    [cron] Bump distribution date (2025-12-09)

commit 0e5a4cacf8262e503fdc6c2347b7cd0aef9f0f86
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Mon Dec 8 21:04:01 2025 -0600

    🧑‍💻 Remove unused servo fields

commit 2cee78634cc65b27f588284304e6821f0ad099c1
Author: Miguel Risco-Castillo <mriscoc@users.noreply.github.com>
Date:   Mon Dec 8 20:58:13 2025 -0500

    🎨 e3v2 -> dwin (#28211)
Ender3-Max-v4.2.2-20251209.bin 174868 bytes 2025-12-08 23:17:56 UTC 0
Score: 0
Membership Required
Ender3-Max-v4.2.2-20251208.bin 174868 bytes 2025-12-07 23:17:57 UTC 5
Score: 0
Membership Required 
commit 19d7cd1a16a2b5305dfc4791f248592a03f366d6
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Sun Dec 7 00:37:23 2025 +0000

    [cron] Bump distribution date (2025-12-07)
Ender3-Max-v4.2.2-20251207.bin 174868 bytes 2025-12-06 23:17:59 UTC 1
Score: 0
Membership Required 
commit d56fbe21fcedf8c14f359568f8f9e746938e80dd
Author: Harald Wagener <oliof@pm.me>
Date:   Sat Dec 6 20:42:52 2025 +0100

    🩹 Fix FTM without FTM_POLYS build (#28209)

commit d14b8e443512cd33edaa2d22507a7bd04d6cc3d1
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sat Dec 6 12:32:09 2025 -0600

    🔧 Clean up TEMP_SENSOR conditionals, SKRat fix

commit ef2fbcd2b60dc39b70436a597288318c699bdf9b
Author: Naomi Rennie-Waldock <nathan.renniewaldock@gmail.com>
Date:   Sat Dec 6 17:26:21 2025 +0000

    🔨 Fix configuration.py URL fetch (#28208)

commit 3551a2613de7399b4e030496d9facbca30e25cd1
Author: Miguel Risco-Castillo <mriscoc@users.noreply.github.com>
Date:   Sat Dec 6 12:01:43 2025 -0500

    🩹 Consistent FTM timer types (#28204)
    
    Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

commit 1acaa6dc15c3ac87b8b5ca792a54d961e5159d56
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Sat Dec 6 00:31:28 2025 +0000

    [cron] Bump distribution date (2025-12-06)
Ender3-Max-v4.2.2-20251206.bin 174868 bytes 2025-12-05 23:17:58 UTC 0
Score: 0
Membership Required 
commit f139ffed7599fa4eb084b3d298b67a0044142c2f
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Dec 4 19:18:55 2025 -0600

    ✨ REMAINING_TIME_PRIME

commit 98875d424f6b05954a50e7dcc78fa0c3a7a4d88f
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Dec 4 19:18:51 2025 -0600

    🚸 Show estimated remaining time

commit a995cbef501c75a1547094f02f28189fe4200982
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Dec 4 13:10:03 2025 -0600

    🧑‍💻 Seconds units

commit 5f9205ef8fd43d8540aa835c91bb34d95311ef34
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Dec 4 15:55:59 2025 -0600

    🚸 Immediate Buttons and Menu Items (2)
    
    Followup to #28180

commit 54f26e61dc5a130195ac595f8e7265344a421fbd
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Fri Dec 5 00:33:49 2025 +0000

    [cron] Bump distribution date (2025-12-05)
Ender3-Max-v4.2.2-20251205.bin 174868 bytes 2025-12-04 23:17:59 UTC 0
Score: 0
Membership Required 
commit e42059f34a1a7d6be7f54416abb3ff91ff0f7569
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Wed Dec 3 20:02:09 2025 -0600

    🎨 Misc. cleanup Dec 4

commit e819ba832e06c5eb3bdcdba8375f384aa6597228
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Thu Dec 4 00:35:26 2025 +0000

    [cron] Bump distribution date (2025-12-04)

commit d23ac65dd4f0c3f68615980e3c59d499c57bc56f
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Wed Dec 3 16:22:33 2025 -0600

    🐛 Fix Controller Fan Soft PWM speed
    
    Co-Authored-By: wrathernaut <97267123+wrathernaut@users.noreply.github.com>

commit 938d3db36f954d492152eb21dcb45ee2bb4ed584
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Wed Dec 3 18:03:39 2025 -0600

    🎨 PSTR() => F()

commit 4cb827b51e3f4317f52741f685102864dea42ae6
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Wed Dec 3 18:10:23 2025 -0600

    🧑‍💻 Editorconfig for contributed lib-uhs3
Ender3-Max-v4.2.2-20251204.bin 174868 bytes 2025-12-03 23:17:57 UTC 0
Score: 0
Membership Required 
commit 92da094c9f60590da4533b4ae97e31db76006650
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Wed Dec 3 16:57:26 2025 -0600

    🧑‍💻 Editorconfig for contributed HAL/DUE/usb

commit 09e943a10c90c7bd8074e3ec5b69f96ac0535397
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Wed Dec 3 00:21:49 2025 -0600

    🧑‍💻 duration_t::remainingEstimate

commit a6d8c6d5b09c56dffd8a3d131b77ac47a205b8e2
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Wed Dec 3 00:32:57 2025 +0000

    [cron] Bump distribution date (2025-12-03)

Marlin is licensed under the GPLv3. Encourage people to comply with the license!