Ender 3 Max - v4.2.2 Control Board with BLTouch Ender3-Max-v4.2.2-BLTouch-<date>.bin - Adds G2 / G3 Arc support - Adds G10 / G11 Firmware based retraction (Use M207, M208, M209 to configure) - Adds M600 - Filament Change - Adds M603 - Set Filament Load / Unload length - Adds M701 - Load Filament - Adds M702 - Unload Filament - Enabled Advanced OK - Enabled CLASSIC_JERK - Enabled Filament Sensor (Microswitch based) - Enabled Meatpack
Firmware Variant | Size | Build Date | Downloads | Feedback | Download |
---|---|---|---|---|---|
Ender3-Max-v4.2.2-BLTouch-20250915.bin | 197976 bytes | 2025-09-15 00:18:15 UTC | 1 |
Score: 0
|
Membership Required |
commit d628d7de44ece81f34d0e3b4d5c95127c7cfb1b3 Author: ThomasToka <117008525+ThomasToka@users.noreply.github.com> Date: Mon Sep 15 01:58:00 2025 +0200 🔨 Improve build output (#28051) - Respect bootloader offset for `maximum_flash_size` output - Match the .elf name to the firmware name. commit 8fe6bc67456a895be8370c05e70a722de07d7bd1 Author: ellensp <530024+ellensp@users.noreply.github.com> Date: Mon Sep 15 11:31:14 2025 +1200 ✨ LIGHTWEIGHT_UI for Native/Simulator (#28049) commit dcbcbb54f9988c2029ecb33f41b1d60578926e62 Author: Andrew <18502096+classicrocker883@users.noreply.github.com> Date: Sun Sep 14 17:15:38 2025 -0400 🧑💻 Update datetime on same config rebuild (#28020) commit 41f9eec4df00112699165c281a392825cb7bcc64 Author: ellensp <530024+ellensp@users.noreply.github.com> Date: Mon Sep 15 07:47:14 2025 +1200 🩹 Retain TMC_DEBUG wrappers (#28052) commit 33e942514b44e26c7c5991c4181f768e9677d76a Author: ellensp <530024+ellensp@users.noreply.github.com> Date: Mon Sep 15 07:22:45 2025 +1200 📌 U8glib-HAL v0.5.5 (#28044) commit 2aa9f70f5e0fbaad8d8f0879f222053457bbde88 Author: thinkyhead <thinkyhead@users.noreply.github.com> Date: Sun Sep 14 06:09:43 2025 +0000 [cron] Bump distribution date (2025-09-14) commit 8aac26275eea221175e8d9e1808bfdecc82b5c6c Author: Scott Lahteine <thinkyhead@users.noreply.github.com> Date: Sat Sep 13 23:05:41 2025 -0500 🎨 Clean up FTM, etc. |
|||||
Ender3-Max-v4.2.2-BLTouch-20250914.bin | 197968 bytes | 2025-09-14 00:18:14 UTC | 3 |
Score: 0
|
Membership Required |
Ender3-Max-v4.2.2-BLTouch-20250913.bin | 197968 bytes | 2025-09-13 00:18:15 UTC | 1 |
Score: 0
|
Membership Required |
Ender3-Max-v4.2.2-BLTouch-20250912.bin | 197968 bytes | 2025-09-12 00:18:13 UTC | 0 |
Score: 0
|
Membership Required |
commit 294903439a3f9c6195f6a9d2ab9ca39d77c8fec7 Author: thinkyhead <thinkyhead@users.noreply.github.com> Date: Thu Sep 11 00:29:48 2025 +0000 [cron] Bump distribution date (2025-09-11) |
|||||
Ender3-Max-v4.2.2-BLTouch-20250911.bin | 197968 bytes | 2025-09-11 00:18:15 UTC | 1 |
Score: 0
|
Membership Required |
commit daa68d560ee9bcadf0d518496811b9ac65f50d9f Author: David Buezas <dbuezas@users.noreply.github.com> Date: Thu Sep 11 01:24:32 2025 +0200 🐛 Fix FT Motion step rate instability (#28043) |
|||||
Ender3-Max-v4.2.2-BLTouch-20250910.bin | 197968 bytes | 2025-09-10 00:18:16 UTC | 0 |
Score: 0
|
Membership Required |
commit 4ce809380b01df1f7cfdaa0255fbebe76957e6e7 Author: thinkyhead <thinkyhead@users.noreply.github.com> Date: Tue Sep 9 00:30:19 2025 +0000 [cron] Bump distribution date (2025-09-09) |
|||||
Ender3-Max-v4.2.2-BLTouch-20250909.bin | 197968 bytes | 2025-09-09 00:18:16 UTC | 1 |
Score: 0
|
Membership Required |
commit a614352fcfe1cab116984a2dece6cceebfa2840a Author: Scott Lahteine <thinkyhead@users.noreply.github.com> Date: Sun Sep 7 22:26:22 2025 -0500 🧑💻 Some FT Motion renames To reduce changes in #28043 commit a54daeeb39d47f2662ab1e15ffec8be717ed2c2c Author: narno2202 <130909513+narno2202@users.noreply.github.com> Date: Mon Sep 8 03:38:37 2025 +0200 ⚡️ Optimize FT Motion load block data (#27991) commit fc4abd13352b07a5494aaec15945b4bbcc4b7cb2 Author: thinkyhead <thinkyhead@users.noreply.github.com> Date: Mon Sep 8 00:32:06 2025 +0000 [cron] Bump distribution date (2025-09-08) |
|||||
Ender3-Max-v4.2.2-BLTouch-20250908.bin | 197968 bytes | 2025-09-08 00:18:16 UTC | 1 |
Score: 0
|
Membership Required |
commit 881ee69f34653a0c6ceb6883549ffae6ed96178f Author: Scott Lahteine <thinkyhead@users.noreply.github.com> Date: Sat Sep 6 18:17:32 2025 -0500 ✨ SENSORLESS_STALLGUARD_DELAY commit 5a8b9d649a86011abdb9508f1008004c125162fa Author: thinkyhead <thinkyhead@users.noreply.github.com> Date: Sun Sep 7 00:32:58 2025 +0000 [cron] Bump distribution date (2025-09-07) |
|||||
Ender3-Max-v4.2.2-BLTouch-20250907.bin | 197968 bytes | 2025-09-07 00:18:21 UTC | 0 |
Score: 0
|
Membership Required |
commit e80d8e9dcf6fb4328592b254d475568174aa9b34 Author: ellensp <530024+ellensp@users.noreply.github.com> Date: Sun Sep 7 06:22:45 2025 +1200 🐛 Fix UART pins for GD32 MFL (#28011) commit 950d141958350235bf0752d85d7d45caffcfe80c Author: thinkyhead <thinkyhead@users.noreply.github.com> Date: Sat Sep 6 06:08:36 2025 +0000 [cron] Bump distribution date (2025-09-06) commit 52ea53a3dd95caffe0bc7ec0c2036eea488cb0be Author: Thijs Triemstra <info@collab.nl> Date: Sat Sep 6 05:14:09 2025 +0200 🎨 Spelling corrections (#28026) commit 7526309ccf38a6384d457f6f15c8f9eed5e9e76c Author: Andrew <18502096+classicrocker883@users.noreply.github.com> Date: Fri Sep 5 23:00:28 2025 -0400 🧑💻 Tweaks to our aging Arduino SdFat Library code (#28031) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com> commit 4342a0f51287330ba013134933ed172839c79ff0 Author: ellensp <530024+ellensp@users.noreply.github.com> Date: Sat Sep 6 14:13:16 2025 +1200 🩹 Fix RAMPS MINIPANEL BEEPER_PIN (#28033) commit 4bca73dc5a88bb68918a0873e93636b0a7367044 Author: Scott Lahteine <thinkyhead@users.noreply.github.com> Date: Fri Sep 5 20:30:39 2025 -0500 ✅ Validate source formatting (#28028) commit 67dc3e432f71463354333e27d36efd1a733e11f3 Author: ellensp <530024+ellensp@users.noreply.github.com> Date: Sat Sep 6 13:27:16 2025 +1200 🔧 Fix bad Config.h sanity-check (#28027) |
|||||
Ender3-Max-v4.2.2-BLTouch-20250906.bin | 197960 bytes | 2025-09-06 00:18:16 UTC | 0 |
Score: 0
|
Membership Required |
Ender3-Max-v4.2.2-BLTouch-20250905.bin | 197960 bytes | 2025-09-05 00:18:15 UTC | 1 |
Score: 0
|
Membership Required |
Ender3-Max-v4.2.2-BLTouch-20250904.bin | 197960 bytes | 2025-09-04 00:18:17 UTC | 2 |
Score: 0
|
Membership Required |
Ender3-Max-v4.2.2-BLTouch-20250903.bin | 197960 bytes | 2025-09-03 00:18:16 UTC | 1 |
Score: 0
|
Membership Required |
Ender3-Max-v4.2.2-BLTouch-20250902.bin | 197960 bytes | 2025-09-02 00:18:17 UTC | 0 |
Score: 0
|
Membership Required |
Ender3-Max-v4.2.2-BLTouch-20250901.bin | 197960 bytes | 2025-09-01 00:18:17 UTC | 0 |
Score: 0
|
Membership Required |