Ender 3 Max - v4.2.7 Control Board
(Initial Beta Release)

Ender3-Max-v4.2.7-<date>.bin
 - Adds G2 / G3 Arc support
 - Adds G10 / G11 Firmware based retraction (Use M207, M208, M209 to configure)
 - Adds M600 - Filament Change
 - Adds M603 - Set Filament Load / Unload length
 - Adds M701 - Load Filament
 - Adds M702 - Unload Filament
 - Enabled Advanced OK
 - Enabled CLASSIC_JERK
 - Enabled Filament Sensor (Microswitch based)
 - Enabled Meatpack
Firmware Variant Size Build Date Downloads Feedback Download
Ender3-Max-v4.2.7-20250917.bin 174744 bytes 2025-09-17 00:18:43 UTC 0
Score: 0
Membership Required
Ender3-Max-v4.2.7-20250916.bin 174744 bytes 2025-09-16 00:18:42 UTC 0
Score: 0
Membership Required 
commit d0dc3b619fab8a6fdd7e304d4443dce315d9fc99
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Mon Sep 15 00:32:42 2025 +0000

    [cron] Bump distribution date (2025-09-15)
Ender3-Max-v4.2.7-20250915.bin 174744 bytes 2025-09-15 00:18:46 UTC 0
Score: 0
Membership Required 
commit d628d7de44ece81f34d0e3b4d5c95127c7cfb1b3
Author: ThomasToka <117008525+ThomasToka@users.noreply.github.com>
Date:   Mon Sep 15 01:58:00 2025 +0200

    🔨 Improve build output (#28051)
    
    - Respect bootloader offset for `maximum_flash_size` output
    - Match the .elf name to the firmware name.

commit 8fe6bc67456a895be8370c05e70a722de07d7bd1
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Mon Sep 15 11:31:14 2025 +1200

    ✨ LIGHTWEIGHT_UI for Native/Simulator (#28049)

commit dcbcbb54f9988c2029ecb33f41b1d60578926e62
Author: Andrew <18502096+classicrocker883@users.noreply.github.com>
Date:   Sun Sep 14 17:15:38 2025 -0400

    🧑‍💻 Update datetime on same config rebuild (#28020)

commit 41f9eec4df00112699165c281a392825cb7bcc64
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Mon Sep 15 07:47:14 2025 +1200

    🩹 Retain TMC_DEBUG wrappers (#28052)

commit 33e942514b44e26c7c5991c4181f768e9677d76a
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Mon Sep 15 07:22:45 2025 +1200

    📌 U8glib-HAL v0.5.5 (#28044)

commit 2aa9f70f5e0fbaad8d8f0879f222053457bbde88
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Sun Sep 14 06:09:43 2025 +0000

    [cron] Bump distribution date (2025-09-14)

commit 8aac26275eea221175e8d9e1808bfdecc82b5c6c
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sat Sep 13 23:05:41 2025 -0500

    🎨 Clean up FTM, etc.
Ender3-Max-v4.2.7-20250914.bin 174744 bytes 2025-09-14 00:18:44 UTC 0
Score: 0
Membership Required
Ender3-Max-v4.2.7-20250913.bin 174744 bytes 2025-09-13 00:18:46 UTC 0
Score: 0
Membership Required
Ender3-Max-v4.2.7-20250912.bin 174744 bytes 2025-09-12 00:18:44 UTC 0
Score: 0
Membership Required 
commit 294903439a3f9c6195f6a9d2ab9ca39d77c8fec7
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Thu Sep 11 00:29:48 2025 +0000

    [cron] Bump distribution date (2025-09-11)
Ender3-Max-v4.2.7-20250911.bin 174744 bytes 2025-09-11 00:18:46 UTC 0
Score: 0
Membership Required 
commit daa68d560ee9bcadf0d518496811b9ac65f50d9f
Author: David Buezas <dbuezas@users.noreply.github.com>
Date:   Thu Sep 11 01:24:32 2025 +0200

    🐛 Fix FT Motion step rate instability (#28043)
Ender3-Max-v4.2.7-20250910.bin 174744 bytes 2025-09-10 00:18:47 UTC 0
Score: 0
Membership Required 
commit 4ce809380b01df1f7cfdaa0255fbebe76957e6e7
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Tue Sep 9 00:30:19 2025 +0000

    [cron] Bump distribution date (2025-09-09)
Ender3-Max-v4.2.7-20250909.bin 174736 bytes 2025-09-09 00:18:47 UTC 0
Score: 0
Membership Required 
commit a614352fcfe1cab116984a2dece6cceebfa2840a
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sun Sep 7 22:26:22 2025 -0500

    🧑‍💻 Some FT Motion renames
    
    To reduce changes in #28043

commit a54daeeb39d47f2662ab1e15ffec8be717ed2c2c
Author: narno2202 <130909513+narno2202@users.noreply.github.com>
Date:   Mon Sep 8 03:38:37 2025 +0200

    ⚡️ Optimize FT Motion load block data (#27991)

commit fc4abd13352b07a5494aaec15945b4bbcc4b7cb2
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Mon Sep 8 00:32:06 2025 +0000

    [cron] Bump distribution date (2025-09-08)
Ender3-Max-v4.2.7-20250908.bin 174744 bytes 2025-09-08 00:18:47 UTC 0
Score: 0
Membership Required 
commit 881ee69f34653a0c6ceb6883549ffae6ed96178f
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sat Sep 6 18:17:32 2025 -0500

    ✨ SENSORLESS_STALLGUARD_DELAY

commit 5a8b9d649a86011abdb9508f1008004c125162fa
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Sun Sep 7 00:32:58 2025 +0000

    [cron] Bump distribution date (2025-09-07)
Ender3-Max-v4.2.7-20250907.bin 174744 bytes 2025-09-07 00:18:52 UTC 0
Score: 0
Membership Required 
commit e80d8e9dcf6fb4328592b254d475568174aa9b34
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Sun Sep 7 06:22:45 2025 +1200

    🐛 Fix UART pins for GD32 MFL (#28011)

commit 950d141958350235bf0752d85d7d45caffcfe80c
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Sat Sep 6 06:08:36 2025 +0000

    [cron] Bump distribution date (2025-09-06)

commit 52ea53a3dd95caffe0bc7ec0c2036eea488cb0be
Author: Thijs Triemstra <info@collab.nl>
Date:   Sat Sep 6 05:14:09 2025 +0200

    🎨 Spelling corrections (#28026)

commit 7526309ccf38a6384d457f6f15c8f9eed5e9e76c
Author: Andrew <18502096+classicrocker883@users.noreply.github.com>
Date:   Fri Sep 5 23:00:28 2025 -0400

    🧑‍💻 Tweaks to our aging Arduino SdFat Library code (#28031)
    
    Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

commit 4342a0f51287330ba013134933ed172839c79ff0
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Sat Sep 6 14:13:16 2025 +1200

    🩹 Fix RAMPS MINIPANEL BEEPER_PIN (#28033)

commit 4bca73dc5a88bb68918a0873e93636b0a7367044
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Fri Sep 5 20:30:39 2025 -0500

    ✅ Validate source formatting (#28028)

commit 67dc3e432f71463354333e27d36efd1a733e11f3
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Sat Sep 6 13:27:16 2025 +1200

    🔧 Fix bad Config.h sanity-check (#28027)
Ender3-Max-v4.2.7-20250906.bin 174736 bytes 2025-09-06 00:18:47 UTC 0
Score: 0
Membership Required
Ender3-Max-v4.2.7-20250905.bin 174736 bytes 2025-09-05 00:18:46 UTC 0
Score: 0
Membership Required
Ender3-Max-v4.2.7-20250904.bin 174736 bytes 2025-09-04 00:18:48 UTC 0
Score: 0
Membership Required
Ender3-Max-v4.2.7-20250903.bin 174736 bytes 2025-09-03 00:18:47 UTC 0
Score: 0
Membership Required

Marlin is licensed under the GPLv3. Encourage people to comply with the license!