Ender3-V2-Stock-<date>.bin - FAQ and common problems
Mainboard Version 4.2.2

 - Stock marlin configuration for Ender 3 v2
 - Bed set to 225 x 225
 - Adds G2 / G3 Arc support
 - Adds G10 / G11 Firmware based retraction (Use M207, M208, M209 to configure)
 - Adds M600 - Filament Change
 - Adds M603 - Set Filament Load / Unload length
 - Adds M701 - Load Filament
 - Adds M702 - Unload Filament
 - Enabled Advanced OK
 - Enabled CLASSIC_JERK
 - Enabled Linear Advance (2022-07-22 onwards) Use this tool to calibrate. Use this video as a guide.
 - Enabled Smart Filament Runout Sensor (Add M412 S0 in your Start G-Code if you do not have a filament sensor).
 - Uses hardware EEPROM, not emulated on SD Card.
 - Added support for Meatpack (2020-01-27 onwards)

KNOWN ISSUES:
- If icons are missing in your screen, follow this forum thread
Firmware Variant Size Build Date Downloads Feedback Download
DWIN_SET.zip 1014542 bytes 2025-03-30 23:37:17 UTC 6947
Score: 0
Membership Required
Ender3-V2-Stock-MarlinUI-20250331.bin 179008 bytes 2025-03-30 23:31:23 UTC 0
Score: 0
Membership Required 
commit 43177af21c279e48f41f2ad8bcaf9a0c294e6b3b
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sun Mar 30 14:57:01 2025 -0500

    πŸ§‘β€πŸ’» Digipot settings cleanup

commit 73ed54308a6da8244ac10de04fb19d173fa54c83
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sun Mar 30 14:56:55 2025 -0500

    πŸ§‘β€πŸ’» Move ENABLE to indirection.h
    
    Followup to add72fd045

commit fd17cc962b4788185f9f2e04c96ce608691afc4a
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Sun Mar 30 06:08:25 2025 +0000

    [cron] Bump distribution date (2025-03-30)

commit aad10ea1c7c1aac37d83c3d8537b4040f6f0e259
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Sun Mar 30 14:58:16 2025 +1300

    πŸ› Fix E DIR init (#27770)
    
    Followup to add72fd045
Ender3-V2-Stock-20250331.bin 167080 bytes 2025-03-30 23:30:51 UTC 0
Score: 0
Membership Required 
commit 43177af21c279e48f41f2ad8bcaf9a0c294e6b3b
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sun Mar 30 14:57:01 2025 -0500

    πŸ§‘β€πŸ’» Digipot settings cleanup

commit 73ed54308a6da8244ac10de04fb19d173fa54c83
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sun Mar 30 14:56:55 2025 -0500

    πŸ§‘β€πŸ’» Move ENABLE to indirection.h
    
    Followup to add72fd045

commit fd17cc962b4788185f9f2e04c96ce608691afc4a
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Sun Mar 30 06:08:25 2025 +0000

    [cron] Bump distribution date (2025-03-30)

commit aad10ea1c7c1aac37d83c3d8537b4040f6f0e259
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Sun Mar 30 14:58:16 2025 +1300

    πŸ› Fix E DIR init (#27770)
    
    Followup to add72fd045
Ender3-V2-Stock-MarlinUI-20250330.bin 178976 bytes 2025-03-29 23:31:25 UTC 0
Score: 0
Membership Required
Ender3-V2-Stock-20250330.bin 167048 bytes 2025-03-29 23:30:54 UTC 0
Score: 0
Membership Required
Ender3-V2-Stock-MarlinUI-20250329.bin 178976 bytes 2025-03-28 23:31:31 UTC 0
Score: 0
Membership Required 
commit 849e432d62ecd9ebe23cb81b66829755b19362f9
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Fri Mar 28 06:09:42 2025 +0000

    [cron] Bump distribution date (2025-03-28)

commit 78d6fec6525924cf659a3d720a5960bfa1eea286
Author: Boyd <irvinmouritsen@gmail.com>
Date:   Thu Mar 27 22:31:45 2025 -0700

    πŸš€ HAL for GD32 MFL (Creality v4.2.2) (#27744)

commit f6eaca6fcdd31d1d1ada67a7b3e3e15135e224f2
Author: FermΓ­n Olaiz <fermino@users.noreply.github.com>
Date:   Fri Mar 28 00:18:08 2025 -0300

    🩹 MKS_TINYBEE ADC reference voltage warning (#27755)

commit efa175820f2e379b569ae01cdc422a8ef12c1f4d
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Mar 27 20:55:59 2025 -0500

    πŸ§‘β€πŸ’» Allow for tests on macOS / Windows

commit 448ff71899a46c71ace774dfd47767a76a226c54
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Mar 27 19:03:53 2025 -0500

    πŸ§‘β€πŸ’» Tweak MAX7219 test pattern

commit c1e8d46d219493b2072e3df24c4dca0ac9b39998
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Mar 27 18:36:04 2025 -0500

    ♻️ ELAPSED / PENDING (ms, start, duration)
Ender3-V2-Stock-20250329.bin 167048 bytes 2025-03-28 23:31:00 UTC 0
Score: 0
Membership Required 
commit 849e432d62ecd9ebe23cb81b66829755b19362f9
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Fri Mar 28 06:09:42 2025 +0000

    [cron] Bump distribution date (2025-03-28)

commit 78d6fec6525924cf659a3d720a5960bfa1eea286
Author: Boyd <irvinmouritsen@gmail.com>
Date:   Thu Mar 27 22:31:45 2025 -0700

    πŸš€ HAL for GD32 MFL (Creality v4.2.2) (#27744)

commit f6eaca6fcdd31d1d1ada67a7b3e3e15135e224f2
Author: FermΓ­n Olaiz <fermino@users.noreply.github.com>
Date:   Fri Mar 28 00:18:08 2025 -0300

    🩹 MKS_TINYBEE ADC reference voltage warning (#27755)

commit efa175820f2e379b569ae01cdc422a8ef12c1f4d
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Mar 27 20:55:59 2025 -0500

    πŸ§‘β€πŸ’» Allow for tests on macOS / Windows

commit 448ff71899a46c71ace774dfd47767a76a226c54
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Mar 27 19:03:53 2025 -0500

    πŸ§‘β€πŸ’» Tweak MAX7219 test pattern

commit c1e8d46d219493b2072e3df24c4dca0ac9b39998
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Mar 27 18:36:04 2025 -0500

    ♻️ ELAPSED / PENDING (ms, start, duration)
Ender3-V2-Stock-MarlinUI-20250328.bin 179000 bytes 2025-03-27 23:31:36 UTC 0
Score: 0
Membership Required 
commit b5068bbc17ed395103564f302aa0cbdde8c004c1
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Mar 27 17:36:16 2025 -0500

    πŸ”¨ Reduce warnings on types

commit 9a8ad9d1013e7273ee7ef679ddf212f537c4708e
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Mar 27 17:34:33 2025 -0500

    🎨 Comment long functions end

commit 5c59abaf6f273be325d92d79ae63e393e8c6038a
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Thu Mar 27 12:11:04 2025 +0000

    [cron] Bump distribution date (2025-03-27)

commit 460bf112d8a52c67055c253569023178af8dd218
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Mar 27 03:33:27 2025 -0500

    ✨ EDITABLE_HOMING_CURRENT (#27760)

commit 7bd74fecbbdf5013d9be612af6c48f1030348bbb
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Mar 27 02:29:58 2025 -0500

    πŸ§‘β€πŸ’» Language tweaks
    
    lang

commit add72fd0452addb13ac7c1fea7d7476dd991cd93
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Mar 27 02:29:11 2025 -0500

    πŸ§‘β€πŸ’» Individual TMC flags

commit ac5fa61de5775b54e1a9f4dc9ad8a7583ef93996
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Mar 27 02:25:43 2025 -0500

    πŸ§‘β€πŸ’» More robust TERN_ macro
Ender3-V2-Stock-20250328.bin 167072 bytes 2025-03-27 23:31:05 UTC 0
Score: 0
Membership Required 
commit b5068bbc17ed395103564f302aa0cbdde8c004c1
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Mar 27 17:36:16 2025 -0500

    πŸ”¨ Reduce warnings on types

commit 9a8ad9d1013e7273ee7ef679ddf212f537c4708e
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Mar 27 17:34:33 2025 -0500

    🎨 Comment long functions end

commit 5c59abaf6f273be325d92d79ae63e393e8c6038a
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Thu Mar 27 12:11:04 2025 +0000

    [cron] Bump distribution date (2025-03-27)

commit 460bf112d8a52c67055c253569023178af8dd218
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Mar 27 03:33:27 2025 -0500

    ✨ EDITABLE_HOMING_CURRENT (#27760)

commit 7bd74fecbbdf5013d9be612af6c48f1030348bbb
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Mar 27 02:29:58 2025 -0500

    πŸ§‘β€πŸ’» Language tweaks
    
    lang

commit add72fd0452addb13ac7c1fea7d7476dd991cd93
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Mar 27 02:29:11 2025 -0500

    πŸ§‘β€πŸ’» Individual TMC flags

commit ac5fa61de5775b54e1a9f4dc9ad8a7583ef93996
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Mar 27 02:25:43 2025 -0500

    πŸ§‘β€πŸ’» More robust TERN_ macro
Ender3-V2-Stock-MarlinUI-20250327.bin 179032 bytes 2025-03-26 23:31:23 UTC 0
Score: 0
Membership Required 
commit dda42fb599d17fd049ee38a95b4e80dc95c9cbd2
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Wed Mar 26 00:29:30 2025 +0000

    [cron] Bump distribution date (2025-03-26)
Ender3-V2-Stock-20250327.bin 167104 bytes 2025-03-26 23:30:52 UTC 0
Score: 0
Membership Required 
commit dda42fb599d17fd049ee38a95b4e80dc95c9cbd2
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Wed Mar 26 00:29:30 2025 +0000

    [cron] Bump distribution date (2025-03-26)
Ender3-V2-Stock-MarlinUI-20250326.bin 179032 bytes 2025-03-25 23:31:27 UTC 0
Score: 0
Membership Required 
commit a8fea3d67451ef9b0593b2d790ad92cad0a5f9a8
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Tue Mar 25 16:41:40 2025 -0500

    🩹 Cleanup (for STM32 I2C LCD)
    
    Followup to 9a8b1eab

commit 1701fd8f641757fa752acf40a6a1a7bdc4d572d4
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Tue Mar 25 16:39:09 2025 -0500

    πŸ”₯ DELTA_MAX_RADIUS
Ender3-V2-Stock-20250326.bin 167104 bytes 2025-03-25 23:30:56 UTC 0
Score: 0
Membership Required 
commit a8fea3d67451ef9b0593b2d790ad92cad0a5f9a8
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Tue Mar 25 16:41:40 2025 -0500

    🩹 Cleanup (for STM32 I2C LCD)
    
    Followup to 9a8b1eab

commit 1701fd8f641757fa752acf40a6a1a7bdc4d572d4
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Tue Mar 25 16:39:09 2025 -0500

    πŸ”₯ DELTA_MAX_RADIUS
Ender3-V2-Stock-MarlinUI-20250325.bin 179032 bytes 2025-03-24 23:31:25 UTC 0
Score: 0
Membership Required
Ender3-V2-Stock-20250325.bin 167104 bytes 2025-03-24 23:30:54 UTC 0
Score: 0
Membership Required
Ender3-V2-Stock-MarlinUI-20250324.bin 179032 bytes 2025-03-23 23:31:22 UTC 0
Score: 0
Membership Required
Ender3-V2-Stock-20250324.bin 167104 bytes 2025-03-23 23:30:51 UTC 0
Score: 0
Membership Required
Ender3-V2-Stock-MarlinUI-20250323.bin 179032 bytes 2025-03-22 23:31:40 UTC 2
Score: 0
Membership Required 
commit 14fa7057718acbed8d0e4238f2eba9b9f645db64
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Sat Mar 22 00:28:38 2025 +0000

    [cron] Bump distribution date (2025-03-22)
Ender3-V2-Stock-20250323.bin 167104 bytes 2025-03-22 23:31:09 UTC 1
Score: 0
Membership Required 
commit 14fa7057718acbed8d0e4238f2eba9b9f645db64
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Sat Mar 22 00:28:38 2025 +0000

    [cron] Bump distribution date (2025-03-22)
Ender3-V2-Stock-MarlinUI-20250322.bin 179032 bytes 2025-03-21 23:31:25 UTC 1
Score: 0
Membership Required 
commit 91a87f45d9d491a259446f439fe9a3ceadecbf87
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Fri Mar 21 13:51:08 2025 -0500

    πŸ§‘β€πŸ’» Some millis() 'unsigned long'

commit 363f324179b608d3be5eabcb0e964ee8a9d0b2ab
Author: Teemo Vaas <teemo@digiwood.ee>
Date:   Fri Dec 22 06:47:36 2023 +0200

    🚸 Fix G4 Dwell overflow

commit a68b70de15282b2f15cb2e96e44ea31fd4b4eedd
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Fri Mar 21 15:48:18 2025 +1300

    πŸ“Œ Clean up ESP32 build (#27672)

commit c29b44fcca8562b20342ad81ba117c78ef39cf40
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Fri Mar 21 15:44:43 2025 +1300

    🩹 Fix Simulator KILL pin overlap (#27668)

commit 2cf4d02a32e717ef6b1d348fe0504aba15cafb23
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Fri Mar 21 15:03:14 2025 +1300

    🩹 Fix TOUCH_UI_FTDI_EVE build (#27667)
    
    Followup to #27275

commit 9a8b1eab93a67c536821844de4a0b70f31479d0b
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Mar 20 20:28:30 2025 -0500

    🩹 Cleanup (for STM32 I2C LCD)
    
    In advance of #26433

commit 57fe45a2a6f4f27019d771359896712cc04c44e2
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Fri Mar 21 00:29:17 2025 +0000

    [cron] Bump distribution date (2025-03-21)
Ender3-V2-Stock-20250322.bin 167104 bytes 2025-03-21 23:30:54 UTC 1
Score: 0
Membership Required 
commit 91a87f45d9d491a259446f439fe9a3ceadecbf87
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Fri Mar 21 13:51:08 2025 -0500

    πŸ§‘β€πŸ’» Some millis() 'unsigned long'

commit 363f324179b608d3be5eabcb0e964ee8a9d0b2ab
Author: Teemo Vaas <teemo@digiwood.ee>
Date:   Fri Dec 22 06:47:36 2023 +0200

    🚸 Fix G4 Dwell overflow

commit a68b70de15282b2f15cb2e96e44ea31fd4b4eedd
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Fri Mar 21 15:48:18 2025 +1300

    πŸ“Œ Clean up ESP32 build (#27672)

commit c29b44fcca8562b20342ad81ba117c78ef39cf40
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Fri Mar 21 15:44:43 2025 +1300

    🩹 Fix Simulator KILL pin overlap (#27668)

commit 2cf4d02a32e717ef6b1d348fe0504aba15cafb23
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Fri Mar 21 15:03:14 2025 +1300

    🩹 Fix TOUCH_UI_FTDI_EVE build (#27667)
    
    Followup to #27275

commit 9a8b1eab93a67c536821844de4a0b70f31479d0b
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Mar 20 20:28:30 2025 -0500

    🩹 Cleanup (for STM32 I2C LCD)
    
    In advance of #26433

commit 57fe45a2a6f4f27019d771359896712cc04c44e2
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Fri Mar 21 00:29:17 2025 +0000

    [cron] Bump distribution date (2025-03-21)
Ender3-V2-Stock-MarlinUI-20250321.bin 179032 bytes 2025-03-20 23:31:23 UTC 1
Score: 0
Membership Required 
commit 5d755676a9deee640593c85d735719cc332a124d
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Wed Mar 19 20:40:54 2025 -0500

    πŸ§‘β€πŸ’» Silence findMissingTranslations grep output

commit d9f2c6444fb04bc78a146a1cd795d66a64d65a84
Author: Andrew <18502096+classicrocker883@users.noreply.github.com>
Date:   Wed Mar 19 21:01:47 2025 -0400

    🚸 ProUI "View Mesh (grid)" item (#26181)
    
    Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

commit 4895388909096c1df822af3ea01d1bc39568642d
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Thu Mar 20 00:28:49 2025 +0000

    [cron] Bump distribution date (2025-03-20)
Ender3-V2-Stock-20250321.bin 167104 bytes 2025-03-20 23:30:52 UTC 1
Score: 0
Membership Required 
commit 5d755676a9deee640593c85d735719cc332a124d
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Wed Mar 19 20:40:54 2025 -0500

    πŸ§‘β€πŸ’» Silence findMissingTranslations grep output

commit d9f2c6444fb04bc78a146a1cd795d66a64d65a84
Author: Andrew <18502096+classicrocker883@users.noreply.github.com>
Date:   Wed Mar 19 21:01:47 2025 -0400

    🚸 ProUI "View Mesh (grid)" item (#26181)
    
    Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

commit 4895388909096c1df822af3ea01d1bc39568642d
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Thu Mar 20 00:28:49 2025 +0000

    [cron] Bump distribution date (2025-03-20)
Ender3-V2-Stock-MarlinUI-20250320.bin 179032 bytes 2025-03-19 23:31:25 UTC 1
Score: 0
Membership Required 
commit c7e64371c989925c74a5c2a13683f71bbbd6bdc7
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Wed Mar 19 17:35:23 2025 -0500

    πŸ§‘β€πŸ’» ProUI: pre-calculate menu sizes

commit 58749a9a0ed93f10295695d7acbe607a6e871d30
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Thu Mar 20 10:02:01 2025 +1300

    🩹 BTT Manta M8P V2.0 fixes (#27748)
    
    The notorious curse of incorrect BTT pins rears its head once again!

commit 26aac7aaab2d2cd4a09f2f17b5b6a852e7cdeb99
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Thu Mar 20 09:45:30 2025 +1300

    πŸ› Fix RAMPS AUX1 RX/TX pins (#27745)

commit a7684ecd6710ede96b8f18f9debe2b69fc7e9f12
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Wed Mar 19 15:13:45 2025 -0500

    πŸ§‘β€πŸ’» Reuse MarlinUI::apply_preheat

commit fc49efcaef97ab657b28ce1077c7bc07d538bacc
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Wed Mar 19 14:34:24 2025 -0500

    πŸ§‘β€πŸ’» Lambda for MarlinUI media items

commit 4f3279fa315b4664349eeae96af62b505e8227ea
Author: Sophist <3001893+Sophist-UK@users.noreply.github.com>
Date:   Wed Mar 19 03:21:30 2025 +0000

    🚸 Move About / Games to menu bottom (#26820)

commit 719bb9c03bb0bc53d324f14bb6eef982e8cea4b1
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Wed Mar 19 15:14:58 2025 +1300

    πŸ”§ LCD_PINS_ENABLE => LCD_PINS_EN (#27700)

commit 15ee0d0e081fd42cf00a5b26b289a2ea14ddd9f5
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Wed Mar 19 14:39:24 2025 +1300

    ✨ MAG_MOUNTED_PROBE_SERVO_NR (#27551)
    
    Co-authored-by: gjdodd <graham.dodd@airintake.co.uk>

commit 23fa94178e1b1d00869058575eee0e7f06602839
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Wed Mar 19 00:31:12 2025 +0000

    [cron] Bump distribution date (2025-03-19)

commit 4ad6fa59df95d175c0acb49c33c2cf83fee5d449
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Tue Mar 18 18:22:22 2025 -0500

    πŸ§‘β€πŸ’» More extensible Temperature::lcd_preheat
Ender3-V2-Stock-20250320.bin 167104 bytes 2025-03-19 23:30:54 UTC 0
Score: 0
Membership Required 
commit c7e64371c989925c74a5c2a13683f71bbbd6bdc7
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Wed Mar 19 17:35:23 2025 -0500

    πŸ§‘β€πŸ’» ProUI: pre-calculate menu sizes

commit 58749a9a0ed93f10295695d7acbe607a6e871d30
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Thu Mar 20 10:02:01 2025 +1300

    🩹 BTT Manta M8P V2.0 fixes (#27748)
    
    The notorious curse of incorrect BTT pins rears its head once again!

commit 26aac7aaab2d2cd4a09f2f17b5b6a852e7cdeb99
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Thu Mar 20 09:45:30 2025 +1300

    πŸ› Fix RAMPS AUX1 RX/TX pins (#27745)

commit a7684ecd6710ede96b8f18f9debe2b69fc7e9f12
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Wed Mar 19 15:13:45 2025 -0500

    πŸ§‘β€πŸ’» Reuse MarlinUI::apply_preheat

commit fc49efcaef97ab657b28ce1077c7bc07d538bacc
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Wed Mar 19 14:34:24 2025 -0500

    πŸ§‘β€πŸ’» Lambda for MarlinUI media items

commit 4f3279fa315b4664349eeae96af62b505e8227ea
Author: Sophist <3001893+Sophist-UK@users.noreply.github.com>
Date:   Wed Mar 19 03:21:30 2025 +0000

    🚸 Move About / Games to menu bottom (#26820)

commit 719bb9c03bb0bc53d324f14bb6eef982e8cea4b1
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Wed Mar 19 15:14:58 2025 +1300

    πŸ”§ LCD_PINS_ENABLE => LCD_PINS_EN (#27700)

commit 15ee0d0e081fd42cf00a5b26b289a2ea14ddd9f5
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Wed Mar 19 14:39:24 2025 +1300

    ✨ MAG_MOUNTED_PROBE_SERVO_NR (#27551)
    
    Co-authored-by: gjdodd <graham.dodd@airintake.co.uk>

commit 23fa94178e1b1d00869058575eee0e7f06602839
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Wed Mar 19 00:31:12 2025 +0000

    [cron] Bump distribution date (2025-03-19)

commit 4ad6fa59df95d175c0acb49c33c2cf83fee5d449
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Tue Mar 18 18:22:22 2025 -0500

    πŸ§‘β€πŸ’» More extensible Temperature::lcd_preheat
Ender3-V2-Stock-MarlinUI-20250319.bin 178920 bytes 2025-03-18 23:31:28 UTC 1
Score: 0
Membership Required 
commit 367cea0d0dfdf71464faf1422f46417388139306
Author: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com>
Date:   Mon Mar 17 22:35:20 2025 -0400

    🚸 Chamber Preheat completion (#26864)
    
    Followup to #21156
    
    Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

commit 0a07bba213424fc8841bb803e697b830c861df4e
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Tue Mar 18 00:28:49 2025 +0000

    [cron] Bump distribution date (2025-03-18)

commit 2f4f2bce15a63fe2b2280b43744176695ece4490
Author: Andrew <18502096+classicrocker883@users.noreply.github.com>
Date:   Mon Mar 17 19:04:59 2025 -0400

    πŸ”¨ PowerShell compatibility (#27720)
Ender3-V2-Stock-20250319.bin 167080 bytes 2025-03-18 23:30:57 UTC 0
Score: 0
Membership Required 
commit 367cea0d0dfdf71464faf1422f46417388139306
Author: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com>
Date:   Mon Mar 17 22:35:20 2025 -0400

    🚸 Chamber Preheat completion (#26864)
    
    Followup to #21156
    
    Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

commit 0a07bba213424fc8841bb803e697b830c861df4e
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Tue Mar 18 00:28:49 2025 +0000

    [cron] Bump distribution date (2025-03-18)

commit 2f4f2bce15a63fe2b2280b43744176695ece4490
Author: Andrew <18502096+classicrocker883@users.noreply.github.com>
Date:   Mon Mar 17 19:04:59 2025 -0400

    πŸ”¨ PowerShell compatibility (#27720)
Ender3-V2-Stock-MarlinUI-20250318.bin 178920 bytes 2025-03-17 23:31:26 UTC 1
Score: 0
Membership Required 
commit 0d87dd9d51d857048ba251ffa22d47a1b2ab2deb
Author: David Buezas <dbuezas@users.noreply.github.com>
Date:   Mon Mar 17 22:27:51 2025 +0100

    ✨ LCD_DOUBLE_BUFFER (#26713)

commit e11a5ee717e35136afe23715fa04f3b63c1917b3
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Mon Mar 17 16:04:42 2025 -0500

    πŸ“ Some config comment updates
    
    Co-Authored-By: Andrew <18502096+classicrocker883@users.noreply.github.com>

commit e8c03630516023a1d7be57f05fad35a219ab5299
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Mon Mar 17 15:19:21 2025 -0500

    🎨 cosmetics

commit 2d6454b3521b8af11912d942cf006726a307cb44
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Mon Mar 17 15:06:35 2025 -0500

    🩹 Update some SD SS pins
    
    Followup to #27650

commit 28548efa751db0937997e2416856d501d92e57f0
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Tue Mar 18 06:54:21 2025 +1300

    🚸 Improve TFT touch calibrate (#26200)

commit da0bef50e168a028f60b39e3ed6591d371ce3862
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Mon Mar 17 00:30:31 2025 +0000

    [cron] Bump distribution date (2025-03-17)
Ender3-V2-Stock-20250318.bin 167080 bytes 2025-03-17 23:30:55 UTC 1
Score: 0
Membership Required 
commit 0d87dd9d51d857048ba251ffa22d47a1b2ab2deb
Author: David Buezas <dbuezas@users.noreply.github.com>
Date:   Mon Mar 17 22:27:51 2025 +0100

    ✨ LCD_DOUBLE_BUFFER (#26713)

commit e11a5ee717e35136afe23715fa04f3b63c1917b3
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Mon Mar 17 16:04:42 2025 -0500

    πŸ“ Some config comment updates
    
    Co-Authored-By: Andrew <18502096+classicrocker883@users.noreply.github.com>

commit e8c03630516023a1d7be57f05fad35a219ab5299
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Mon Mar 17 15:19:21 2025 -0500

    🎨 cosmetics

commit 2d6454b3521b8af11912d942cf006726a307cb44
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Mon Mar 17 15:06:35 2025 -0500

    🩹 Update some SD SS pins
    
    Followup to #27650

commit 28548efa751db0937997e2416856d501d92e57f0
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Tue Mar 18 06:54:21 2025 +1300

    🚸 Improve TFT touch calibrate (#26200)

commit da0bef50e168a028f60b39e3ed6591d371ce3862
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Mon Mar 17 00:30:31 2025 +0000

    [cron] Bump distribution date (2025-03-17)
Ender3-V2-Stock-MarlinUI-20250317.bin 178920 bytes 2025-03-16 23:31:25 UTC 1
Score: 0
Membership Required 
commit b954959f55d86e0feff045a561f70524bb260bc8
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sun Mar 16 03:24:00 2025 -0500

    ✨ M550 CONFIGURABLE_MACHINE_NAME (#27731)

commit 434bf81f8e98a8ede3576ad9fcc36b7f3cfe6fff
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sun Mar 16 00:36:22 2025 -0500

    🩹 Fix max Y/Z endstop pins on GMARSH X6 REV1

commit 82d3d78e3190ea314f1f1f59f9a0c3acf64a59c3
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Mon Mar 10 01:11:20 2025 -0500

    πŸ”§ BOARD_LCD_SERIAL_PORT

commit fb4d465360990013858c9ba97cc6a3e236f97644
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Sun Mar 16 00:32:26 2025 +0000

    [cron] Bump distribution date (2025-03-16)
Ender3-V2-Stock-20250317.bin 167080 bytes 2025-03-16 23:30:54 UTC 1
Score: 0
Membership Required 
commit b954959f55d86e0feff045a561f70524bb260bc8
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sun Mar 16 03:24:00 2025 -0500

    ✨ M550 CONFIGURABLE_MACHINE_NAME (#27731)

commit 434bf81f8e98a8ede3576ad9fcc36b7f3cfe6fff
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sun Mar 16 00:36:22 2025 -0500

    🩹 Fix max Y/Z endstop pins on GMARSH X6 REV1

commit 82d3d78e3190ea314f1f1f59f9a0c3acf64a59c3
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Mon Mar 10 01:11:20 2025 -0500

    πŸ”§ BOARD_LCD_SERIAL_PORT

commit fb4d465360990013858c9ba97cc6a3e236f97644
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Sun Mar 16 00:32:26 2025 +0000

    [cron] Bump distribution date (2025-03-16)

Marlin is licensed under the GPLv3. Encourage people to comply with the license!