1 Auto Home Issue:
- When I perform the auto home, the extruder always stays too high, even after I manually adjust the height.
- Additionally, I have to readjust the height every time I turn the printer on or after finishing a print.
2 Issue When Starting a Print: - When I try to start a print, the printer begins printing but only makes one line and then stops.
- It’s worth noting that the printer doesn’t have a filament sensor, but that doesn’t seem to be related to the problem.
3 Issue with Printing G-code Calibration Files: - When I try to print a G-code calibration file, the printer simply doesn’t start the print.
4Don’t work with USB.
*Only work with usb in Utilimaker cura
I would be happy if anyone can help because I don’t know anything and I’m completely new to this